Connection to E1/T1 digital lines..

Connection to E1 / T1 digital lines. Analogue and digital cards utilise the same form factor and maybe installed in the same switch frame. Each digital card offers up to 30 ports, connected directly to an E1 line. Connections to a T1 circuits provide the standard 24 ports. Fractional 64kbps circuits and telephone signaling are not supported.

 

 

 

Connection to analogue PABX / PSTN..

Each analogue card offers 4 private circuit connections or 2 PABX / PSTN and 2 private circuit connections. Each port is presented on a standard RJ45 socket.

 

PDF - PCM Switch 6u (Hardware) Download 2 Page Brochure PCM Switch 6u (Hardware) Virtual Brochure Click Here>>

PDF - PCM Switch 2u (Hardware) Download 2 Page Brochure PCM Switch 2u (Hardware) Virtual Brochure Click Here>>

 

Connect up to 10 sites on a single region..

The Regional Control Processor is used to connect together up to 10 sites to form a regional coverage network. The RCP performs all the Inter-site call set-up management tasks, including PSTN, PABX's and hardwired dispatchers (MHD).

 

PDF - Regional Control Processor Download 2 Page Brochure Regional Control Processor Virtual Brochure Click Here>>

The Inter Regional Processor (IRP) allows systems of greater than 10 sites to be constructed. The IRP is based on an industrial grade PC with a silicon RAM or Fast Flash drive for improved performance. There are no moving parts associated with the call set-up aspects of operation and traditional hard disk drives are only used for booting the machine and logging call information. This ensures the best possible reliability.